Horizontal Cutout Tile 9W 48V 40K Ventoflex

SKU: VFTH12N09S40K Categories: ,

Product Description

VentoFlex Flexible Copper Clad Laminate (FCCL) sheets can be mounted directly to most any non-conductive interior surface with no requirement for a heat sink. Featuring 90 CRI Luxeon LEDs in a wide range of color temperatures, VentoFlex tiles provide seamless uniform illumination of luminous surfaces at setback distances as low as 2 inches.

Ambient lighting is all about creating the right mood. VentoFlex helps designers set the exact tone and aesthetic they intended, wither its a backlit lobby, decorative wall or something that hasn’t even been imagined yet. With VentoFlex, lighting design is no longer limited by flat surfaces the tiles mount to any surface and can bend to 90 degrees and beyond.

Available in 12″ x 12″ square tiles, these innovative LED tiles can be cut and formed around any design element, including rounded corners and tight spaces without taking up much room at all 0.15 (3.81mm). A pair of scissors is the only tool required to cut VentoFlex tiles to the size and shape you desire.

VentoFlex can link up to 10 or 15, 12″ x 12″ tiles to one Class 2 LED Driver, all on the same 0-10V or DALI dimmer. That is 1440 or 2160 square inches of versatile lighting power! When connecting tiles together, the cables don’t have to physically touch each other, enabling even more design flexibility.

Additional Information

Mounting Type

Mount to Any Non Conductive Surface
Viewing Angle

140 degree viewing angle
Luminous Efficacy

100 lm/W (See efficacy table on datasheet)
Color Rendering Index (CRI)

>90, R9>50
Color Temp

4000 Kelvin
Voltage

48 VDC
Operation Supply Voltage

48 VDC
MSL Rating

–
Mounting Hardware

Staples/Nails/Screws/Double Sided Tape
RoHS

Yes
REACH Compliant

Yes
Conflict Mineral Free

Yes
Harmonization Code

8531.90.15.00
ECCN

EAR99
Country of Origin

MX (Mexico)
Product Status

New Product Introduction (NPI)
SKU Description Datasheet STEP File IGES File
VFTH12N09S40K VentoFlex Flexible Copper Clad Laminate (FCCL) sheets can be mounted directly to most any non-conductive interior surface with no requirement for a heat sink. Featuring 90 CRI Luxeon LEDs in a wide range of color temperatures, VentoFlex tiles provide seamless uniform illumination of luminous surfaces at setback distances as low as 2 inches. Ambient lighting is all about creating the right mood. VentoFlex helps designers set the exact tone and aesthetic they intended, wither its a backlit lobby, decorative wall or something that hasn’t even been imagined yet. With VentoFlex, lighting design is no longer limited by flat surfaces the tiles mount to any surface and can bend to 90 degrees and beyond. Available in 12" x 12" square tiles, these innovative LED tiles can be cut and formed around any design element, including rounded corners and tight spaces without taking up much room at all 0.15 (3.81mm). A pair of scissors is the only tool required to cut VentoFlex tiles to the size and shape you desire. VentoFlex can link up to 10 or 15, 12" x 12" tiles to one Class 2 LED Driver, all on the same 0-10V or DALI dimmer. That is 1440 or 2160 square inches of versatile lighting power! When connecting tiles together, the cables don't have to physically touch each other, enabling even more design flexibility.