High on hills and in mountaintops where reception is the strongest and clearest is where you will find REMEC equipment operating. REMEC provides high-powered, reliable integrated microwave and millimeter wave subsystem solutions for the telecommunications market. Among the products offered by REMEC is an Outdoor Unit to enhance communications and signal processing. The current Outdoor Units offered by REMEC are the only ‘off-the-shelf’ commercial products that are successfully implemented in over 250,000 locations.

Looking to improve the point-to-point and point-to-multi-point signaling for cellular phone call connections to local sites, REMEC designed a power indicator that could be used in conjunction with its line of Outdoor Units.  The visual indicator would have to withstand the kinds of outdoor conditions that can only be delivered by Mother Nature and still equal the reliability of other REMEC products.  After careful deliberation, REMEC selected the VCC LCS series of light pipes to meet this design demand.  The VCC LCS series is a moisturized NEMA certified light pipe that provides a seal against water, dust and ice conditions

About VCC Light Pipes

VCC light pipes are specially formulated UV resistant lens permits the light pipe to provide optimal visual clarity in direct sunlight. The entire line of VCC light pipes increaseefficiency and conserve maintenance time since there’s no physical connection between the PCB board and mounting panel. This permits the PCB to be serviced without requiring a mechanical disconnect.  The 6 different lengths and colors open the field of communication, space and environmental possibilities when designing new, innovative products.

More about the LCS Series Light Pipe

LCS is used for transmitting light from a PCB mounted LED to the front panel while providing protection from the outside environment limiting the chance of water or dust entering the electronic enclosure and not only meeting but surpassing the IP 67/ NEMA 6P requirements. LCS can be used with 5mm, 3mm or surface mount lenses that retain enough clarity to capture outside light and bring it into a photo diode receptor. When light output, clarity, performance and environmental protection are required, the LCS series is a product that should be considered for highly reliable, flexible and successful indication. Contact VCC today and our team will collaborate with you to find the best light pipe solution for your design.

To learn more about REMEC product offerings, click here.

When Dispensing Dynamics International (DDI) faced a supply chain issue on a light pipe from another manufacturer, they turned to VCC.  Our extensive variety and selection of flexible and rigid light pipes, interconnectors, and PCB accessories offer convenient, affordable solutions in stock, and ready for your use. DDI knew with the assistance of our dedicated experts, finding the right part would be a cinch. Within 48 hours of contacting VCC, DDI received samples that proved to be a clear solution to their first production build on a new version of their industry leading motion detected paper towel dispensers.  The ability of VCC to respond quickly with a selection that met the requirements helped DDI maintain their development schedule.

DDI has 75 years of experience developing new and innovative applications such as the first patented paper roll towel dispenser, the first lever action dispenser, the first automatic transfer tissue dispenser, and the best selling line of no touch dispensers. The time and thought put into prototype development and testing has led to a successful line of state-of-the art dispensing solutions.  The designs of DDI have propelled and kept them at the top of their field.

VCC Optoelectronics is an innovator as well and we are proud of our relationships with companies like DDI.  Working hand in hand with these flourishing companies allows VCC to anticipate and meet the needs of future projects. We are dedicated to reacting quickly to customers in need of specific products and solutions for the ever-growing field of light indicator solutions. Call or contact us at www.vcclite.com and we can expedite the delivery of your lighting solution.

For more information about DDI products visit: www.dispensingdynamics.com

What are OLEDs?

OLEDs are Organic Light Emitting Diodes. Kodak was the first to develop this Technology that uses organic compounds such as glass and plastic to compose the emissive electroluminescent layer. This layer is no thicker than a film and is applied in a process that is simple, low cost and requires fewer materials than other LED compounds used to emit light and provide full spectrum color displays.

What types of OLEDs are there?

There are three basic types of OLEDs being developed and implemented. Those types are:

• Small Molecule OLED – Known as SM-OLEDs, these devices are typically made from glass substrates and are deposited through a vacuum process. The SM OLED is more efficient than the other types and can be evaporated allowing for complex multi-layer structures. The drawbacks with the small molecule OLED is that it is not flexible and the vacuum process is more expensive than other OLED types. Newer developments with stacked and flexible plastic substrates are removing the disadvantages and this product is expected to have large impacts in the future of OLED installations.
• Polymer OLED – Also called Light Emitting Polymers (LEP), this OLED type is generally composed of a plastic compound that forms the electroluminescent conductive layer. The process for depositing the materials in this layer is a precision ink jet application. This process is low cost, simple and can be created with multiple levels to improve efficiency. Once applied, it is extremely flexible. The drawback with the Polymer OLED is that current efficiency is not at the level of the SM OLED, however, it has surpassed LCD efficiency levels.
• Phosphorescent OLEDs – This OLED type has up to four times higher efficiency than that of a conventional fluorescent OLED. Its application process is the same as the Polymer OLEDs as it is applied by precision ink jet printing, however, it is highly efficient in converting electrical energy. Recent developments are assuring the future success of this OLED type.

The Future of OLEDs

Many different versions of these main OLED types are entering the market. They offer a full color spectrum that is thin and flexible. Future displays using OLEDs will be flexible, low cost, brighter and more efficient. OLEDs also have a wide viewing angle with high contrast video capabilities. This technology is expected to result in displays less than 1mm thick.

HST Automotive (Horsepower, Speed, and Torque) offers a global brand of high-performance, zero emission electric vehicles. The RIDE state-of-the art, three-wheeled vehicle provides an environmentally conscious means of personal mobility. They can be used for any number of purposes from security and facility maintenance operations to luxury entertainment.

The RIDE is constructed from high quality aluminum and can fold down to 38” for travel and storage; it will even fit inside your SUV. It has front and rear suspension, is 100% electric and travels at 15 mph with optional upgrades allowing speeds of up to 25mph. It can be charged from a standard 110V outlet.

In an ongoing effort to improve the design, HST wanted to implement a viable solution for permitting two different light intensities for the back lights of the vehicle. The LED’s were also required to provide a moisture-sealed lens, have the ability to withstand shock and vibration and be available for expedited shipment to meet development and production schedules. For many suppliers this would be a tall order to fill these special requirements with an off-the-shelf product.

VCC was highly recommended to HST, due our high-quality and versatile products, along with our ingenuity in design and application knowledge. The custom building capabilitiesavailable from VCC allowed us to produce a solution quickly by slightly modifying our standard CNX 460 series LED cable assembly. This type of LED cable assembly can it accommodate a 10mm LED or a Super High Flux LED providing dual intensities for the RIDE backlight application.

Per Jean Jamie, “We were very impressed with Orlando’s ingenuity to provide a quick solution. They were able to provide two different levels of light intensities, and also with its standard features of being moisture-sealed and able to withstand shock & vibration, it was a perfect solution for our dilemma.”

VCC is dedicated to our customers and we take pride in our ability to modify our standard products to ensure a better fit and function for our customer’s requirements. This design knowledge enables us to offer a high-quality product that is better suited for special customer requirements in a very short amount of time.

For quick solutions to your specialized LED and cabling application needs, please contact us today at www.vcclite.com. For more information on the RIDE product visit: http://www.ridevehicles.com/

The most important challenges to conquer in lighting indication are the following:

• Visibility – Though it seems simple and obvious, the most important consideration in lighting indication design is visibility. Using the right type of indicators for your environment and installing the lighting where it can be easily viewed and analyzed by operators and maintenance personnel is essential.
  • Stack and Tower Lights – Standard machine condition such as ‘power on’ (green), ‘maintenance needed’ (blue), ‘caution’ (yellow) and ‘stop/alarm’ (red) are some of the varied indicators most commonly used with stack and tower lights. Implementation of these devices allows clear communication of machine status to any personnel entering the production environment. The ability to quickly analyze the machine conditions can minimize or even eliminate downtime.
  • Panel Indicators – Process data, environmental conditions, switch indicators, sensor status and a number of other messages displayed on the operator panel can streamline system processes. Where paper manuals and signs can be misplaced or damaged  and thus not available when needed, a row of panel indicators or several rows can be easily mastered by the operator through repetition creating a more efficient employee and process.
• Process Communication
  • Varied indicator types and signaling – Using a row or row of indicators on your panel of various shapes, sizes and colors is an effective way of communicating process status, alarms and accomplishing accurate control monitoring. Implementing lighting indicators as sensor emulators showing a variety of conditions is possibly the most effective way to increase efficiency and gain more process control.
  • Operator Training – The key to achieving a more streamlined process through implementation of lighting indicators is operator training. Using various indictor types and signaling such as flashes or a series of lights to indicate a certain condition is only as effective as the understanding of the operator. Initial training and quick notification of process changes is mandatory if production is to be increased.
  • Consistency across process types – Consistency of your lighting indicators will eliminate confusion and increase effectiveness by allowing one operator to easily move between production steps and still maintain an accurate understanding of the lighting communication. It is not often possible to have all lighting indicators communicate the same message but providing consistency across each process type should be taken into consideration. Creating an environment that permits cross training in a minimum amount of time and with a minimum amount of change in the meaning of the machine indicators allows flexibility and highly productive employees.

VCC offers a wide variety of lighting indicators for all your environmental and process needs. Check out our catalog or contact our dedicated professionals to assist you in streamlining your lighting indication process and creating the most efficient production environment possible.

You reach up to press the button and see a green panel light come on indicating a connection. You don’t even realize you are holding your breath until you hear the voice on the other side say “How can we help?” and hear the release of air from your body. A few short minutes later the knowledge that help is on the way provides comfort and your sense of isolation recedes.

VCC adheres to this way of operation daily. Not only do we wish to assist our clients but also strive to provide the comfort and knowledge that in the expansive field of indication and illumination, you are not alone. That is why Kings III of America has chosen VCC and our line products to meet their illumination needs. Kings III indicators must endure harsh environments and exposure to the sun, rain, wind and even dust.  All these elements wreak havoc on standard LEDs and lenses. VCC helped Kings III resolve this issue with our line of UV additive Polycarbonate Lenses, which are specifically designed to withstand these environments.

In addition, our CMS series products meet NEMA 4 and 6P standards for use in conditions that include exposure to elements such as rain, sleet, windblown dust and rain and other harsh conditions.  VCC lenses are ideal when used with the Conxrite interconnects for mounting the LED directly to the panel.  Finish your illumination with the wide selection of VCC light pipes and you have provided a reliable, durable method of transmitting the light from a PCB mounted LED to your panel.

Anytime a special application arises and you need a reliable protective lens and LED solution VCC is here to help. There are many options out there in the world of LED’s and our experts are dedicated quickly and efficiently finding products to meet the requirements for your project. To learn more or get answers to your LED questions, visit us at www.vcclite.com. We will be happy to assist you with all selections as well as sending a free sample for you to inspect or use in your latest prototype.

• The first generation of automation workers is retiring and work forces are shrinking. Those leaving the workforce are taking with them important knowledge of machine operation and in their place is a less experienced team.
• With the reduced process knowledge, having as much consistency in your signaling as possible will help lower the learning curve and result in better performance with predictable volumes of quality product.
• Lost and misplaced hard copy documentation during a crisis can result in increased downtime as the operator may be unaware there is a problem or unsure how to resolve it. With consistent signaling the operator will come to recognize warning signs that can be addressed before the process is halted.
• Standard signaling for common alarms allows the operator to quickly deduce the cause of a machine failure and either fixes the failure or calls maintenance with a clearer diagnosis of the problem.

When engineering your production floor layout, taking into account the basic signals that can be grouped and displayed in a consistent manner is essential for optimizing efficiency and quality. For alarm signaling the recently released ISA/ANSI 18.02 Alarm Management for the Process Industries provides excellent guidelines for indicating and prioritizing alarms. Having indicators on machinery or in stack lights for warnings or caution conditions should be standard as well. Addressing an upcoming error will be simpler and less expensive than the downtime once failure is realized. Implementing standards for your automated indicators and processes will improve your production floor in the following ways:

• Operators will learn your system quicker and be better able to respond when unexpected actions occur.
• There will be a greater tuning of your processes that will allow more consistent forecasting of product.
• You will achieve better diagnostic and more reliable data from your workers as they will better understand the systems.

VCC recognizes the importance of quality and reliable signaling and has an extensive line of LED indication products to help you achieve your production goals. Speak to our specialist today about your indication needs for the future or in re-evaluating your current equipment operations. Contact us for more information.

With the ability to offer a power feed setting to the client, safety becomes an even more critical issue. Installing a clear, bright and reliable indicator for placement and lift detection was an important design requirement. The ability to make this connection in a reliable yet flexible manner was also important. Hougen engineered, selected and implemented VCC panel lens products into their latest development to achieve that goal.

“The Bi-Color CNX “D” connector was selected for easy assembly to the front panel and multi function of a Bi-Color RED / Green LED for their Safety Indicator Light.” said John Haas, from RC Merchant, VCC representative,   “ Thus, providing an Indicator to ensure the power drill is operated in a safe manner.”

VCC’s LED cable assemblies provide extensive time and cost savings over the traditional methods of wiring. With our pre-made assemblies there is no need to solder wires to the LED orheat shrink the insulator. This saves the client time, cost, storage room and testing time. Changes in design or replacement of components down the road are also completed in a more timely and efficient manner.

VCC offers a wide assortment of pre-made cables to meet all your project requirements. We will also engineer and manufacture custom cables. Our entire line of panel lens products is available for your project’s indicating and signal needs. Check out our catalog or contact us today for more information.

For more information about the line of products from Hougen Mfg, visit their website at http://www.hougen.com. Fore more information about the HMD925 Drill, click here.

High power LEDs from VCC are now in use for in an almost limitless number of applications among which are:

• Accent lighting applications such as: contour lighting, stairway lighting, pendants, coves, displays and front panels.
• Outdoor lighting applications such as: floodlights and landscape lighting.
• Specialty lighting applications such as: Flashlights, reading lamps, security lighting and more.

Architects, Engineers and Security Specialists are including LED usage in the basis of their core designs effectively replacing incandescent, halogen, and even fluorescent style lights. The largest selling points in these applications are the ability to meet new environmental standards from LEED and other groups for close to 40% improved power efficiency and the ability to reduce the overall carbon footprint of the building. High Power LEDs also enjoy a longer operating life that practically eliminates the need for maintenance.

High power, high intensity LED selections from VCC offer many additional benefits including:

• Silicone lens technology
• Saturated color spectrum
• Special “design-to-fit” secondary optics
• Low thermal resistance
• Full dimming capabilities
• Superior ESD protection
• 100% RoHS Compliance

Our LED selection experienced less than 10% light output decay under test conditions and with our many vivid, saturated colors, surface mounted options and high energy efficiency, our product range has the right high power LEDs for your requirements. Contact us today and our dedicated professionals will be happy to help select the right product for your high power LED application.

VCC Optoelectronics and Integra Electronics showcased their full product offerings including the SMD LED line, panel mounted products and custom light pipes. The VCC product line carries many specialized items that meet the strict requirements of the ViaSat applications. Samples of these products along with LED Testers and engineering development kits where handed out to the ViaSat engineers working on signal and indication projects.  Over 400 Engineers and buyers attended the show with suppliers from all over Southern California showcasing their products.

“This is a great way to give back to the Veterans that protect our country and at the same time gain mindshare with the ViaSat engineers and buyers” Said Sharon Poltorak with Integra Electronics.

VCC is committed to participating in events that not only showcase our product line but also gives back to valued members of our community and those in need. Check out the expansive VCC product line today and contact us for samples and/or order requirements.  Our experienced staff is always available to assist you with your LED, Lite Pipe and Surface-mounted PCB connection needs.

About:

ViaSat produces publically traded company designs and manufactures innovative satellite and digital communication products that enable fast, secure, and efficient communications to and from any location. Their product line is featured in applications such as mobile communcation networking, microprocessor chipset communication, military networking with datalinks and terminals for situational combat awareness, broadband satellite and much more.

Integra Electronics, Inc. was established in 1998 as an authorized, stocking distributor of passive and electro-mechanical electronic components.  The Company’s line of suppliers supports its customers with high quality components and excellent service.  You will find a large variety of optoelectronics, capacitors, inductive components, resistors, semi-conductors, frequency devices and more.