Panel Mounts + Clips

VCC’s panel mounts and clips are designed for mounting 3mm and 5mm through-hole LEDs for use as panel mount indicator lights.

Installation of panel mount LED lights is accomplished by passing the mount through a panel hole and then pressing a retaining ring onto the back. With the mount or clip firmly attached to the display panel, the LED can be easily inserted or removed.

The traditional method of mating PCB-mounted LEDs with display panels has been to allow the LED to protrude through a hole in the panel. Alternative interfacing methods include gluing the LED to the panel. These methods result in a panel mount light with very restricted LED viewing angle, an LED unprotected from a possible push-through problem, and permitting the transmission of ESD through the LED resulting in circuit board component damage.

VCC’s panel mounts and clips are constructed of U.L. 94 V2 polycarbonate.

CMC 285- 5mm Mount SMC 130- 3mm Mount		CLP 125- Standard Clip CLP 126- Extended Clip CLP 127- Outer Reflector Clip CLP 129- Inner Reflector Clip